Zebralight SC52W L2 AA/14500 Flashlight

Description: ZLSC52WL2: SC52W L2 AA Flashlight, 280 Max Lumens(500 with a 14500 AA)ZebraLightThis light has 3 main levels (High, Medium, and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels or strobes.Basic OperationShort click turns on the light to High or turns off the light.Long click (press and hold for about 0.6 seconds) turns on the light to Low.Advanced Operation and ConfigurationShort click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.Press and hold to cycle from Low, Medium and High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.The second sub-level of each main levels can be configured after 6 double clicks. Double click (starting with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.This light uses the main LED (flashing 1 to 4 times) to indicate the estimated remaining capacity of the battery. To start the battery indicator, (from Off) short-click 4 times without pause.FeaturesBattery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)All levels are current regulatedLow battery alert when the light is switched Off (LED flashes if the battery voltage is below 1.06V)Automatic stepping down to lower output when battery (AA and 14500) capacity is lowBuiltin over-discharging protection for 14500 batteries at 2.8V cutoffDurable electronic soft-touch switchSmart user interface provides fast and easy access to all brightness levels and beacon-strobes.Precision machined unibody casing from premium grade aluminum bar stocksProprietary heat sinking design bonds the LED board directly to the unibody aluminum casingDurable natural hard anodized finish (Type III Class I)Sealed and potted LED driver circuitryTempered optical grade glassPreinstalled bezel down pocket clipBattery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drainWaterproof to IPX7 (2 meters, 30 minutes)SpecificationsLED: Cree XM-L2 Neutral White (Norminal CCT 4400K)User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels or strobes.Light OutputHigh: H1 280 Lm (0.9 hrs) or H2 172 Lm (1.7 hrs) / 108 Lm (3 hrs) / 4Hz StrobeMedium: M1 50 Lm (7.5 hrs) or M2 25 Lm (12 hrs) / 12 Lm (27 hrs)Low: L1 2.7 Lm (4 days) or L2 0.34 Lm (3 weeks) / 0.06 Lm (2 months) / 0.01 Lm (3 months)Runtime tests are done using Sanyo 2000mAh Eneloop AA batteries. Light output with 14500 batteries are the same except that the H1 is 500Lm for the first minute and then steps down to 280Lm.Operating Voltage Range: 0.7V - 4.2VBattery: One 1.5V AA (NiMH, lithium or alkaline) or 3.7V 14500 Li-ion battery. Batteries are not included in the package.Parasitic Drain: Negligible (equivalent to 16 years, much less than the self discharging of a battery)Beam Type80 degree spill12 degree hot spotDimensionsHead Diameter: 0.93 inch (23.6 mm)Length: 3.08 inch (78.2 mm)Weight1.4 oz (40 gram) without battery

Price: 120 USD

Location: Hamilton, Ohio

End Time: 2025-02-11T17:41:13.000Z

Shipping Cost: N/A USD