WILWOOD FORWARD SWING BRAKE & CLUTCH PEDAL SET WITH MASTER CYLINDERS,6.25 PEDALS

Description: You are bidding on a Brand New Wilwood Forward Swing Mount Brake & Clutch Pedal Combo with Master Cylinders & Proportioning Valve Includes: Forward swing mount brake and clutch pedal assembly, 6.25:1 Ratio, with adjustable pedal pads (Part #340-14360) Polished aluminum tandem brake master cylinder, 15/16" bore, and proportioning valve with mounting bracket and lines to connect them (Part #260-13375-P, #220-15047, and #260-11179) Aluminum compact integral clutch master cylinder, 3/4" bore (Part #260-15098) Upon request, for $20 more, we can make this Wilwood's 260-10372 remote reservoir master cylinder set We also have this set with 7:1 Ratio pedals available here Pedal Set Info: Wilwood's Swing Mount Tandem Brake and Clutch Assembly simplifies installing a tandem outlet, single pushrod brake master cylinder in conjunction with a hydraulic clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. Will fit most tandem cylinders available with 3.25 horizontal bolt spacing. Pedal base has additional mount points for vertical mount 2.50" spacing tandem master cylinders using 5/16-18 studs (not supplied with pedal assembly). Clutch master cylinder mount is also a 2.50" vertical mount and will use most popular single outlet cylinders. Brake and clutch pedal have 6.25:1 ratio Fully adjustable aluminum pedal pads with waffle style non-slip surface High strength forged aluminum ladder style pedal arms Easy mounting location with full interchangeability with Wilwood pedals of the same type and style Clutch Master Cylinder Info: Wilwood’s GS Compact Integral Master Cylinders are an all new rebuildable design featuring a high pressure die cast aluminum body with a protective e-coat finish. Integral cylinders feature a positive seal internal bellows cap. Internally, a refined return spring and piston assembly assures positive pressure control along with a quick and complete release. 3/4" Bore 1.25" Stroke 0.39" Volume Single Outlet Brake Master Cylinder and Proportioning Valve Set Info: Set Includes: Polished Tandem Chamber Master Cylinder 15/16" Bore cylinder Wilwood tandem chamber master cylinders represent the latest refinements in brake pressure actuation and fluid control. The exclusive Wilwood features incorporated in this innovative and unique new design make it the perfect choice for a wide range of custom manual or power brake applications. High-pressure die casting of a premium alloy produces a high-capacity body that is lightweight, looks great, and has the durability for competition. A black anodized, machined billet lid captures a pressure balanced bellows gasket with 100% sealing against moisture invasion or fluid leakage. The mounting flange is slotted to accommodate installation on bolt centers between 3.22" and 3.40". That makes it a simple bolt-on to many OE mounts including the popular Chrysler, Corvette, GM, and Ford Mustang master cylinder bolt patterns. The body also features two through-hole mounts on 6.40" centers for side mounting to frame members or other secure elements of the chassis. Each master cylinder is configured with full separation between the front and rear reservoir chambers and fluid outlets. There is pressure access on both sides of the piston bore for right or left hand plumbing based on mount location. A total piston stroke of 1.10" is distributed at a 2:1 volume ratio between the primary and secondary chambers. Diagram shown at the bottom Combination Proportioning Valve Simplifies mounting, fluid circuit plumbing, brake light wiring, and brake bias adjustments on modified, custom built, or competition vehicles equipped with brake system upgrades Maintains full separation between the front and rear fluid circuits when used with tandem outlet or dual mount master cylinder assemblies Bias proportioning adjustment is provided in the rear fluid circuit The front circuit has a single inlet and two outlets for optional line routing A fluid port with a pressure switch responds instantly to pressure in the front fluid circuit for brake light activation. A wiring pigtail with a protective boot is included with the switch Diagram shown at the bottom Stainless Steel Fluid Tubes Precision bent with preinstalled stainless tube nuts for a simple bolt-on installation Mounting Bracket Black e-coating will give years of durable, rust-free performance Stainless Steel Button Head Bolts We also have thousands of other High Performance Parts in our store. Shipping: There is no faster shipping on Ebay. If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day. If it's after 5:00 EST, we will ship it the next business day. If you pay for the item on the weekend, we will ship it out Monday. No delays here. We want you to have the parts as bad as you do. We will be glad to ship internationally. Just send us a message for an international shipping quote. Accepted payment methods: We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.

Price: 799.99 USD

Location: Fort Smith, Arkansas

End Time: 2025-01-08T19:31:46.000Z

Shipping Cost: 9.99 USD