Wicked Edge GO Precision Knife Sharpener - WE60 Performance Kit By Zanvak Free S

Description: Wicked Edge GO Precision Knife Sharpener - WE60 Performance Kit By Zanvak Free Shipping in Australia, Australian Authorised Dealer Highlights Made in the USA Sharpens a wide assortment of knives Lightweight and compact - easy to store and use in small spaces Easy C-clamp mounting to a hard, flat surface 200/600 Grit Diamond Stones Pack (2 ea) 800/1000 Grit Diamond Stones Pack (2 ea) Digital Angle Cube Ability to adjust angles independently for asymmetrical grinds Vise is operated with an included Allen key Description The Wicked Edge GO Precision Knife Sharpener - WE60 is the next generation of the original Wicked Edge GO - WE50. Like all Wicked Edge sharpeners, the Wicked Edge GO is made in the USA. It offers a range of 13-31 degrees per side, can handle knives up to 6.35mm thick and 38cm long and allows for independent angle adjusting on each side of the knife. A redesigned Standard Vise allows for easy clamping of fully flat ground and distally tapered blades styles that are frequently found on kitchen and pocket knives. The Wicked Edge GO - WE60 is designed to be lightweight and compact for easy home storage or travel. It can be mounted to any hard, flat surface with the included C-clamp or directly mounted to a work surface through mounting holes in the base. Specifications Can sharpen blades up to 38cm long Can clamp blades up to 6.35mm thick with included vise screws (longer screws may be used to enable clamping of even thicker blades) Angle Range: 13-31 degrees per side (26-62 degrees inclusive) Angle adjustment in 1 degree increments Sharpener's angle markings are calibrated for knife's edge at 5/8" over top of vise Minimum knife height for stones to clear vise at lowest angle is 5/8" over top of vise. Low Angle Adapter (sold separately) required to reach lower angles Guide Rods: 8.75" Product Weight: 3.6 lbs Compatibility The WE60 is compatible with the following items: All Wicked Edge sharpening stones and strops Low Angle Adapter Scissor Attachment Chisel Attachment Advanced Alignment Guide Safety Shields WE60 Specific Aluminium Base Vise Key Depth Key The WE60 is NOT compatible with the following items: Generation 3 Jaws for 1/4" Blades All upgrade kits All hard cases Aluminium and Granite Bases 8”, 10", 12", 14" and 15" Guide Rods Video Highlights Made in the USA Sharpens a wide assortment of knives Lightweight and compact - easy to store and use in small spaces Easy C-clamp mounting to a hard, flat surface 200/600 Grit Diamond Stones Pack (2 ea) 800/1000 Grit Diamond Stones Pack (2 ea) Digital Angle Cube Ability to adjust angles independently for asymmetrical grinds Vise is operated with an included Allen key Description The Wicked Edge GO Precision Knife Sharpener - WE60 is the next generation of the original Wicked Edge GO - WE50. Like all Wicked Edge sharpeners, the Wicked Edge GO is made in the USA. It offers a range of 13-31 degrees per side, can handle knives up to 6.35mm thick and 38cm long and allows for independent angle adjusting on each side of the knife. A redesigned Standard Vise allows for easy clamping of fully flat ground and distally tapered blades styles that are frequently found on kitchen and pocket knives. The Wicked Edge GO - WE60 is designed to be lightweight and compact for easy home storage or travel. It can be mounted to any hard, flat surface with the included C-clamp or directly mounted to a work surface through mounting holes in the base. Specifications Can sharpen blades up to 38cm long Can clamp blades up to 6.35mm thick with included vise screws (longer screws may be uséd to enable clamping of even thicker blades) Angle Range: 13-31 degrees per side (26-62 degrees inclusive) Angle adjustment in 1 degree increments Sharpener's angle markings are calibrated for knife's edge at 5/8" over top of vise Minimum knife height for stones to clear vise at lowest angle is 5/8" over top of vise. Low Angle Adapter (sold separately) required to reach lower angles Guide Rods: 8.75" Product Weight: 3.6 lbs Compatibility The WE60 is compatible with the following items: All Wicked Edge sharpening stones and strops Low Angle Adapter Scissor Attachment Chisel Attachment Advanced Alignment Guide Safety Shields WE60 Specific Aluminium Base Vise Key Depth Key The WE60 is NOT compatible with the following items: Generation 3 Jaws for 1/4" Blades All upgrade kits All hard cases Aluminium and Granite Bases 8”, 10", 12", 14" and 15" Guide Rods Video Free Shipping Australia Wide Australian Owned & OperatedHuge range - Best prices Products Sharpening Stones StropsEmulsionsLeather GoodsKnivesSharpening Systems Search by Brand TSPROFJendeTormekKME SharpenersBlade MatesEdgeMasterEZESharpSpartan LeatherGlobalVictorinox Wicked Edge GO Precision Knife Sharpener - WE60 Performance Kit By Zanvak Free Shipping in Australia, Australian Authorised Dealer $ 843.00 Wicked Edge GO Precision Knife Sharpener - WE60 Performance Kit By Zanvak Free Shipping in Australia, Australian Authorised Dealer $ 843.00 Contact us Save our Store Item description Highlights Made in the USA Sharpens a wide assortment of knives Lightweight and compact - easy to store and use in small spaces Easy C-clamp mounting to a hard, flat surface 200/600 Grit Diamond Stones Pack (2 ea) 800/1000 Grit Diamond Stones Pack (2 ea) Digital Angle Cube Ability to adjust angles independently for asymmetrical grinds Vise is operated with an included Allen key Description The Wicked Edge GO Precision Knife Sharpener - WE60 is the next generation of the original Wicked Edge GO - WE50. Like all Wicked Edge sharpeners, the Wicked Edge GO is made in the USA. It offers a range of 13-31 degrees per side, can handle knives up to 6.35mm thick and 38cm long and allows for independent angle adjusting on each side of the knife. A redesigned Standard Vise allows for easy clamping of fully flat ground and distally tapered blades styles that are frequently found on kitchen and pocket knives. The Wicked Edge GO - WE60 is designed to be lightweight and compact for easy home storage or travel. It can be mounted to any hard, flat surface with the included C-clamp or directly mounted to a work surface through mounting holes in the base. Specifications Can sharpen blades up to 38cm long Can clamp blades up to 6.35mm thick with included vise screws (longer screws may be uséd to enable clamping of even thicker blades) Angle Range: 13-31 degrees per side (26-62 degrees inclusive) Angle adjustment in 1 degree increments Sharpener's angle markings are calibrated for knife's edge at 5/8" over top of vise Minimum knife height for stones to clear vise at lowest angle is 5/8" over top of vise. Low Angle Adapter (sold separately) required to reach lower angles Guide Rods: 8.75" Product Weight: 3.6 lbs Compatibility The WE60 is compatible with the following items: All Wicked Edge sharpening stones and strops Low Angle Adapter Scissor Attachment Chisel Attachment Advanced Alignment Guide Safety Shields WE60 Specific Aluminium Base Vise Key Depth Key The WE60 is NOT compatible with the following items: Generation 3 Jaws for 1/4" Blades All upgrade kits All hard cases Aluminium and Granite Bases 8”, 10", 12", 14" and 15" Guide Rods Video Other items you may like KME Precision Knife Sharpening System Diamond Kit KF-D4 - Free Shipping AUS Other items you may like KME Sharpener Wood Mounting Base KF-BASE comes with Post - Free Shipping AUS Other items you may like 1"x6" Naniwa Starter Stone Kit for Edgepro Hapstone TSPROF - Free Shipping Other items you may like Knifemate Scissor Attachment Accessory - 100% Made In Australia - Free Shipping GENERAL HomeAdd to FavouritesFeedback CUSTOMER SERVICE Shipping X Shipping We offer secure and fast shipping to anywhere in Australia or the world.Orders are typically dispatched within 1-2 business days after purchase.Where possible items will be combined into one order, however in some instances you may receive multiple deliveries.You will receive a tracking number after your order has been dispatched. Keep an eye on it for any updates as your order makes its way to you.Delivery times are 1-3 days for standard shipping to east coast metropolitan cities. WA, SA, NT, and regional or remote areas may take longer. CLOSE Returns X Returns If the product doe not meet its advertised purpose, change your mind or no longer require the item, you will need to pay the return shipping cost. If you receive an incorrect or faulty product please send us a message via ebay or visit our contact us page on the Zanvak website. Change of Mind If you have a change of mind about your purchase or have ordered the wrong item Zanvak will provide you with an exchange, store credit or refund provided that: You can provide a proof of purchaseIt is within 30 days of your item(s) being sentThe item(s) is unused with original, sealed packaging and tags attachedThe item(s) is not subject to the exclusions below Where there has been a change of mind or the part is no longer suitable for whatever reason, the customer is responsible for the return shipping costs. Listing Incorrect or Item is Not as Described If the part does not fit your needs due to an incorrect or incomplete listing on our website, Zanvak will provide you with an exchange, store credit or refund and cover 100% of the return shipping cost provided that: The item(s) is returned within 30 days of arrivalThe item(s) has not been fitted to your vehicleYour vehicle VIN where the item did not fitPicture of the boxed item before sending the return Warranty Unless otherwise stated on the item, all products sold by Zanvak are sold under the manufacturerâs warranty and conditions from the date of purchase. Warranty claims must meet one the following criteria and be sent to Zanvak with a receipt to be eligible for a refund: The product is faulty or not of acceptable quality; orThe product is not fit for its intended purpose; orThe product does not match the sample or the Zanvak descriptions; orThe product was damaged during delivery Exclusions Please choose carefully when selecting the following items. Due to the exclusive/made to order nature of these items we cannot provide a return or refund if you change your mind. Custom made and/or special ordersTSPROF: If the item is out of stock or made to orderTORMEK: If the item is special orderKME CLOSE Contact us X Contact us Due to recent eBay policy changes, we can no longer take calls directly to us. You can however still contact us directly via eBay messages. HERE We will get back to you shortly CLOSE About us X About us TWO MATES, ONE VISION. Australiaâs largest online seller of guided sharpening products. Established in 2020 by best mates Russ and Ed, they found a need for readily available sharpening gear within the Australian and New Zealand market - with that Zanvak™ was born. Proud to offer Australian and New Zealand customers an efficient way to compare and shop from an extensive range of leading brands at great prices! Your sharpening journey starts HERE CLOSE NEWSLETTER Subscribe to our newsletter to be kept upto date with exclusive offers and discounts Subscribe Now © 2021 Zanvak, All rights reserved eBay integration by

Price: 843 AUD

Location: Rouse Hill, NSW

End Time: 2023-10-19T05:34:52.000Z

Shipping Cost: 59.2 AUD