Description: I started to break in this engine a few years ago but it is a pain. Tightest pinch I've ever seen. The Hyper 21 8 ports weren't even this bad as bad as those were. Must use a heat gun to pre-heat to at least 250. A hair dryer or engine warmer probably won't be good enough. I got through half a gallon on it and decided to spare my starter box and use a different engine in that car. Meant to get back to it but no longer interested. Still needs to finish break-in. My guess is another gallon should do it. If you havn't broke in very many engines, this is not the engine for you. It's been sitting and is a little gummed up but crank can be turned. I left the old Mugen flywheel on it and including 3 sets of shoes that go to this clutch. I don't seem to have any more springs for this clutch. Also included is NIB 2 rods, 2 wristpins, & G clips for this engine. When I got this, it was 200+ but this same engine can be found for 99.99 but you will start from the beginning with it and doesn't come with all the extra stuff I'm including with mine. Did not come with any papers/documentation. I had to find a PDF online to get part #s for the spare parts.
Price: 133 USD
Location: Yuma, Arizona
End Time: 2025-01-08T20:54:15.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: STS
Type: 2-Stroke Engine
Compatible Vehicle Type: Cars, Trucks & Motorcycles
Compatible Fuel Type: Nitro & Glow Fuel
Compatible Scale: 1:8, 1:10
