Description: iPhone Were not only selling such these items, if you need any other more accessories, please dont hesitate to contact us. Since the time difference, perhaps well reply you late for several hours, please be patient to wait our reply, thank your very much for your understanding.Specification: STEP POWER power supplies for distribution boards The STEP POWER power supply range was developed especially for building automation. The low idling losses and high degree of efficiency ensure maximum energy efficiency. They allow flexible use and can be snapped onto the DIN rail or screwed onto an even surface. Technical Data Input data AC operation Nominal input voltage range100 V AC ... 240 V AC Input voltage range85 V AC ... 264 V AC 95 V DC ... 250 V DC Input voltage range AC85 V AC ... 264 V AC Input voltage range DC95 V DC ... 250 V DC Voltage type of supply voltageAC/DC Inrush current< 15 A (typical) Inrush current integral (I2t)< 0.6 A2s AC frequency range45 Hz ... 65 Hz Frequency range DC0 Hz Mains buffering timetyp. 25 ms (120 V AC) typ. 150 ms (230 V AC) Current consumption0.6 A (120 V AC) 0.3 A (230 V AC) Nominal power consumption84.2 VA Protective circuitTransient surge protection; Varistor Power factor (cos phi)0.57 Typical response time< 0.5 s Input fuse3.15 A (slow-blow, internal) Recommended breaker for input protection6 A ... 16 A (Characteristics B, C, D, K) Output data Efficiency> 89 % (for 230 V AC and nominal values) Output characteristicU/I Nominal output voltage24 V DC ±1 % Setting range of the output voltage (USet)22.5 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted) Output current Imax3.75 A Nominal output current (IN)1.75 A (-25 °C ... 55 °C) 1.9 A (-25 °C ... 40 °C permanent) Derating55 °C ... 70 °C (2.5%/K) Feedback voltage resistance≤ 35 V DC Protection against overvoltage at the output (OVP)< 35 V DC Control deviation< 1 % (change in load, static 10 % ... 90 %) < 2 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Residual ripple< 60 mVPP (20 MHz) Short-circuit-proofyes Output power42 W Peak switching voltages nominal load< 40 mVPP (20 MHz) Maximum no-load power dissipation< 0.7 W Power loss nominal load max.5 W Rise time< 0.5 s (UOUT (10 % ... 90 %)) Connection in parallelyes, for redundancy and increased capacity Connection in seriesyes Connection data Input Connection methodScrew connection Conductor cross section solid min.0.2 mm² Conductor cross section solid max.2.5 mm² Conductor cross section flexible min.0.2 mm² Conductor cross section flexible max.2.5 mm² Conductor cross section AWG min.24 Conductor cross section AWG max.12 Stripping length6.5 mm Screw threadM3 Tightening torque, min0.6 Nm Tightening torque max0.8 Nm Output Connection methodScrew connection Conductor cross section solid min.0.2 mm² Conductor cross section solid max.2.5 mm² Conductor cross section flexible min.0.2 mm² Conductor cross section flexible max.2.5 mm² Conductor cross section AWG min.24 Conductor cross section AWG max.12 Stripping length6.5 mm Screw threadM3 Tightening torque, min0.6 Nm Tightening torque max0.8 Nm LED signaling Types of signalingLED Operating voltage displayGreen LED Signal output: LED status indicator Status display"DC OK" LED green Note on status displayUOUT > 21.5 V: LED lights up Electrical properties Number of phases1.00 Insulation voltage input/output4 kV AC (type test) 3.75 kV AC (routine test) Insulation voltage output / PE500 V DC (routine test) Insulation voltage input/output3.75 kV AC (routine test) 4 kV AC (type test) Insulation voltage input / PE3.5 kV AC (type test) 2 kV AC (routine test) Product properties Product typePower supply MTBF (IEC 61709, SN 29500)> 1569000 h (40 °C) Insulation characteristics Protection classII (in closed control cabinet) Overvoltage categoryIII Degree of pollution2 Dimensions Dimensional drawing Width54 mm Height90 mm Depth Device depth (DIN rail mounting)55 mm (Device depth (DIN rail mounting)) Horizontal pitch3 Div. Installation dimensions Installation distance right/left0 mm / 0 mm Installation distance top/bottom30 mm / 30 mm Mounting Mounting typeDIN rail mounting Assembly instructionsalignable: 0 mm horizontally, 30 mm vertically Mounting positionhorizontal DIN rail NS 35, EN 60715 With protective coatingNo Material specifications Housing materialPlastic Foot latch materialPOM (Polyoxymethylene) Housing materialPolycarbonate Environmental and real-life conditions Ambient conditions Degree of protectionIP20 Ambient temperature (operation)-25 °C ... 70 °C (> 55° C derating : 2.5%/K) Ambient temperature (storage/transport)-40 °C ... 85 °C Climatic class3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing) Shock18 ms, 30g, in each space direction (according to IEC 60068-2-27) Vibration (operation)< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) 15 Hz ... 150 Hz, 2.3g, 90 min. Standards and regulations Rail applicationsEN 50121-4 Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV) Standard – Limitation of mains harmonic currentsEN 61000-3-2 Standard - Electrical safetyIEC 62368-1 (SELV) Standard – Protection against shock currents, basic requirements for protective separation in electrical equipmentEN 50178 Standard – Safety extra-low voltageIEC 62368-1 (SELV) und EN 60204-1 (PELV) Standard - Safe isolationDIN VDE 0100-410 Standard - Safety of transformersEN 61558-2-16 Approval data CSACSA-C22.2 No. 107.1-01 Shipbuilding approvalDNV GL (EMC B) ABS, NK UL approvalsUL/C-UL listed UL 508 UL/C-UL Recognized UL 60950-1 UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4A (Hazardous Location) NEC Class 2 as per UL 1310 Conformity/Approvals SIL in accordance with IEC 615080 EMC data Low Voltage DirectiveConformance with Low Voltage Directive 2014/35/EC Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU EMC requirements for noise emissionEN 61000-6-3 EN 61000-6-4 EMC requirements for noise immunityEN 61000-6-1 EN 61000-6-2 Noise immunityEN 61000-6-2:2005 Electrostatic discharge Standards/regulationsEN 61000-4-2 Electrostatic discharge Contact discharge6 kV (Test Level 3) Discharge in air8 kV (Test Level 3) CommentsCriterion A Electromagnetic HF field Standards/regulationsEN 61000-4-3 Electromagnetic HF field Frequency range80 MHz ... 1 GHz Test field strength10 V/m Frequency range1 GHz ... 2 GHz Test field strength10 V/m Frequency range2 GHz ... 3 GHz Test field strength10 V/m CommentsCriterion A Fast transients (burst) Standards/regulationsEN 61000-4-4 Fast transients (burst) Input4 kV (Test Level 4 - asymmetrical) Output2 kV (Test Level 3 - asymmetrical) CommentsCriterion A Surge voltage load (surge) Standards/regulationsEN 61000-4-5 Input2 kV (Test Level 3 - symmetrical) 4 kV (Test Level 4 - asymmetrical) Output1 kV (Test Level 2 - symmetrical) 0.5 kV (Test Level 1 - asymmetrical) CommentsCriterion A Conducted interference Standards/regulationsEN 61000-4-6 Conducted interference Frequency range10 kHz ... 15 kHz 10 kHz ... 15 kHz CommentsCriterion A Criterion A Voltage3 V (Test Level 2) 3 V (Test Level 2) Conducted interference Frequency range10 kHz ... 15 kHz 10 kHz ... 15 kHz CommentsCriterion A Criterion A Voltage3 V (Test Level 2) 3 V (Test Level 2) Voltage dips Standards/regulationsEN 61000-4-11 Emitted interference Standards/regulationsEN 61000-6-3 Radio interference voltage in acc. with EN 55011EN 55011 (EN 55022) class B used in industry and residential area / EMC 1 Emitted radio interference in acc. with EN 55011EN 55011 (EN 55022) class B used in industry and residential area / EMC 1 Package Include:1 pcsPlease read the following notes before completing orderPlease double check if this product fits for the model of your machine model before buying. Please check your shipping address carefully before checkout, it cant be changed if order completed. SHIPPINGWe will ship your order within 1-2 business day asap of receiving your cleared payment.We Will pack your order carefully before shipping,your order will be shipped by airmail.Economy Shipping is untracked,no tracking information,but we will mark as shipped on ebay if order is shipped.We will leave tracking number for Standard Shipping and ePacket delivery.Customs will random inspection some parcel,that may make your order take some more days for delivery.So,Ship to US 1 to 3 Weeks,UK,EU,Europe 2 to 4 Weeks. other country 3 to 6 Weeks,please be patience.Shipping time is only estimated and not guaranteed.We do not bear any customs duties and import charges.If you do not receive your item on time, please contact us immediately for further assistance.Please note we do not afford any customs duties and import charges, these fees are the buyers responsibility. If you do not receive your item in time, please contact us immediately for further assistance. FeedbackWe will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receive it.If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback.We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.Serious Buyer Only! Please place bid only if you agree with all the terms.About Return 1）Note: For your best shopping experience in our store and saving your time. Please Do Not click "Return this item" except that you just dont need it any more. 2）Because "return request" cant help you to solve the problem efficiently, it may takes a little longer time for you to get a reply due to we check with our "return request" every 2 days. 3）The fastest way to solve problem, please contact us (well respond in 24 hours if you contact us at working days). You will receive helpful and practical solution through the communication between us. 4）Refunds given only for DOA item or it cant be used. If so, please reported within 5 days and return to us within 30 days after the delivery date for exchange or refund. 5）If you need return, please check twice to confirm the item dont work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation,Then well get a unique address for return. We always try the best to reply buyer in time, But because we from the different place, We have different time, So if we dont reply in time, that means we are off duty time, Please give us more time, We will reply as soon as we see it. Please Trust us. The more communicatin , The more undertanding, The more trust. Thanks again and agian for all customer.
Price: 85 USD
Location: Shenzhen
End Time: 2024-12-14T07:20:05.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Backup Time: N/A
Brand: Phoenix Contact
Color: White
Construction Type: Enclosed
Country/Region of Manufacture: Poland
Custom Bundle: No
Efficiency: 89%
Features: Adjustable Output, DC Input Capable, RoHS Compliant
Inrush Current Rating: 1.75A
Installation Area: Indoor
Item Depth: 3 in
Item Height: 90 mm
Item Width: 54 mm
Maximum Operating Temperature: 70 °C (158 °F)
Minimum Operating Temperature: -25 °C (-13 °F)
Mounting Style: DIN Rail Mount
MPN: 2868648
Nominal Capacity: 84Ah
Nominal Current Rating: 1 A
Nominal Power Rating: 42 W
Nominal Voltage Rating (AC): 230 V
Nominal Voltage Rating (DC): 24 V
Output Voltage Rating (AC): 230 V
Output Voltage Rating (DC): 24 V
Plug Type: N/A
Protection Properties: Low Voltage Protection, Overcurrent Protection, Safety Circuit Protection, Short Circuit Protection, Spike Protection, Surge Protection, Temperature Protection, Under Voltage Protection
Ripple & Noise: 60 mV
Series: Step
Type: Forward Converter
