P12 Max - PC Fan, High-Performance 120Mm Case Fan, PWM Controlled 200

Description: Fluid Dynamic Bearing: Long service life, silent operation at low speeds and powerful performance at maximum speed.DESIGNED FOR PERFORMANCE: Due to the high static pressure, the fan guarantees efficient cooling even with increased air resistance. Suitable for use on heat sinks & radiatorsWIDE RPM RANGE: Thanks to the 4-pin connector, the speed can be controlled via PWM. Below 5 % PWM the fan stands still, above 5 % it is infinitely variable between 200-3300 rpmPROVEN FAN DESIGN: The closed ring fan wheel enables low-vibration rotation at high speeds and strong resistances while maintaining high static pressureOUTSTANDING PERFORMANCE: Most powerful 120 mm fan, 25 years of experience, direct customer support, many years of spare parts supply, CO2 neutral company Product Description Improved Stability The P12 Max features a closed fan wheel design. The advantage of this fan wheel combination is a pressure stability without compromise. In scenarios with high pressure resistances and higher speeds, the force effect is distributed uniformly over the entire fan wheel and enables low-vibration rotation while maintaining high static pressure. Virtually Silent due Fluid Dynamic Bearing As a special feature, the P12 Max is equipped with ARCTIC's proven Hydrodynamic Bearing.* This enables the virtually silent operation at low speeds that customers have been asking for. At maximum speed, brute performance is still guaranteed. Although these bearings tend to wear out, ARCTIC does not compromise on durability and still offers the 6-year promise. *All P12 Max fans from ARCTIC are now equipped with fluid dynamic bearing. Please note that products from resellers may still be sold with dual ball bearing. Extremely Wide Speed Range Building up on the success of the P12 PWM, the P12 Max extends the controllable speed to an impressively wide range from 200 RPM up to 3300 RPM. This enables a quiet operation when low airflow is needed and also an unprecedented level of performance on heatsinks and radiators. The P12 Max provides a significant performance boost to existing air and water cooling solutions. Maximum Performance - Without Compromises The P12 Max delivers focused airflow and high static pressure, making it suitable for all scenarios. The fan is optimised for use on radiators, heat sinks, pinholes and mesh. Therefore, the P12 Max is the ideal fan for enthusiasts and professionals who are looking for maximum performance with a long service life. 0dB Mode - Zero rpm The fan speed can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time ensures maximum performance when required. Thus, the P12 Max allows an incomparably dynamic adjustment of the speed, so that the airflow can be perfectly regulated for every case. Maximum Smoothness, Minimum Vibration Due to a sinus-magnetizing, the new motor of the P12 Max only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. The rubber pads mounted at the corners additionally dampen the residual vibrations caused by the higher revolutions. General data Performance Fan Speed: 200–3300 rpm, (0 rpm under 5% PWM) Airflow: 81.04 cfm | 137.69 m³/h Static Pressure: 4.35 mmH₂O Noise Level: 0.6 Sone Operating Ambient Temperature: 0–40 °C MTTF: > 500,000 Hours Fan Fan Frame: Standard Control Type: Pulse Width Modulation - PWM Connector: 4-Pin-Connector Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Start Up Voltage: 3.9V DC Current: 0.29 A Cable Length: 400 mm Connector: 4-Pin PWM Connector Size & Weight Length: 120 mm Width: 120 mm Height: 25 mm Weight: 184 g

Price: 21.53 USD

Location: Honey Grove, Texas

End Time: 2024-11-25T05:03:44.000Z

Shipping Cost: 0 USD