Description: Free Tool Kit RequirementSize of 4”x8” DO NOT come with Tool KitSize of 12”x60” Include 1 set of Basic Tool KitSize of 24”x60” and above Include 1 set of Deluxe Tool KitLimited 1 Set of Tool Kit for each Account ONLY regardless of quantity purchase Deluxe tool kit will be given if 12"x60" and 24"x60" or above are purchased togetherItem Specification: Thickness of film (C=10 micron): 15C±0.5C Thickness of film with release liner: 31C±0.5C Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition) Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition) Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany Storing period: 2 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place Indoor life: 4 years when followed rules of application and use Outdoor life: 3 years when followed rules of application and use Application: from +10°С to +20°С, usage from -30°С to +30°С Dimensional stability: shrinkage less than 5% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04 Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005 Test result: 4-5 Exposure cycle: ASTM D4329-13 cycle A Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 5h condensation at (50±2.5)℃ BPT, Exposure Duration: 52h Description: Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low - medium tack self adhesive (Easy to Reposition) Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners) Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. Buyer is responsible for all of the wrinkles & creases issue if using on a plotter or cutter. On Dec 6, 2024 at 18:02:19 PST, seller added the following information:
Price: 4.99 USD
Location: Rowland Heights, California
End Time: 2025-01-09T01:33:04.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
ebay店铺第一分类: Holographic
Installation temperature: Vinyl will tend to rip & tear if apply below 70°F
Size: 3Mil Thickness
Free Squeegee and knife: Limited 1 squeegee & 1 knife on each EBAY account
Manufacturer Part Number: Ez-Vinyl-Wrap
Specific: Body Kit Wing Spoiler Blade Gas Fuel Door Pillar
Placement on Vehicle: Left, Right, Front, Rear
Brand: EZAUTO
Type: Blank Decal Vinyl Sheet(s)
Free Knife Squeege requirement: Purchased sizes must be larger / over than 12"x60
Theme: Aftermarket Parts
Store Part Number: Hood Roof Trunk Fender Wrap Lips
Finish: Chrome Mirror
Use for: Universal Fit Car SUV Truck Van Interior Exterior
Available Variations
Color: 4"x8" (10cm x 20cm) Sample
Price: 4.99 USD
Available Quantity: 59
Quantity Sold: 54
Color: 12"x60" (1FT x 5FT)
Price: 11 USD
Available Quantity: 30
Quantity Sold: 25
Color: 24"x60" (2FT x 5FT)
Price: 22 USD
Available Quantity: 20
Quantity Sold: 15
Color: 36"x60" (3FT x 5FT)
Price: 30 USD
Available Quantity: 16
Quantity Sold: 11
Color: 48"x60" (4FT x 5FT)
Price: 40 USD
Available Quantity: 8
Quantity Sold: 3
Color: 60"x60" (5FT x 5FT)
Price: 50 USD
Available Quantity: 8
Quantity Sold: 3
Color: 72"x60" (6FT x 5FT)
Price: 54 USD
Available Quantity: 5
Quantity Sold: 0
Color: 84"x60" (7FT x 5FT)
Price: 63 USD
Available Quantity: 6
Quantity Sold: 1
Color: 96"x60" (8FT x 5FT)
Price: 72 USD
Available Quantity: 6
Quantity Sold: 1
Color: 108"x60" (9FT x 5FT)
Price: 81 USD
Available Quantity: 7
Quantity Sold: 2
Color: 120"x60" (10FT x 5FT)
Price: 90 USD
Available Quantity: 17
Quantity Sold: 12
