Description: Physical Properties Viscosity 900 cPs Mixed Mix Ratio 2:1100 parts A to 50 parts B by weight or volume Working Time 65 Minutes at 200 Gram Mass Peak Exotherm 160°C Time To Reach Peak 80 Minutes Density 1.10 g/cc Cured Cure Time 1 to 3 days at 25°C Heat Cure 2 Hours @ 25°CPlus 1 Hour @ 120°C Set-To-Dry @ 10 Mil Film 6 Hours Surface Dry 9 Hours Handling Time 8 Hours Mechanical Properties Test Criteria (1) Room Temp Cure Room Temp + Heat Cure Hardness 78 D 81 D Izod Impact ft-lb/in .13 .19 Tensile Shear Strength psi 3,100 3,765 Tensile Strength psi 9,600 12,300 Tensile Modulus psi 460,000 489,120 Ultimate Elongation % 3.8 2.3 Heat Distortion Temperature 84°C 110°C Compressive Strength 12,300 13,000 24 Hours Water Boil % Weight Gain 2.2 1.8 MAX GPE AVAILABLE COLORSMAX GPE WHITE A/B 1.5 Gallon Kithttps://www.ebay.com/itm/222643966152MAX GPE BLACK A/B 1.5 Gallon Kithttps://www.ebay.com/itm/222654897945MAX GPE RED A/B 1.5 Gallon Kithttps://www.ebay.com/itm/-/311966632307MAX GPE YELLOW A/B 1.5 Gallon Kithttps://www.ebay.com/itm/311966571686MAX GPE BLUE A/B 1.5 Gallon Kithttps://www.ebay.com/itm/-/222654876571 ART RESIN MAX GPE color resin on canvas CUT AND PASTE THE FOLLOWING LINK TO VIEW THE EPOXY ART SLIDESHOW COVERAGE AND YIELD PER GALLONUse these theoretical factors to determine coverage of an unfilled epoxy resin as a theoretical guide. Please note that this is a 1.5-gallon kit and these numbers are based on theoretical physical data. It is also important to consider the type of substrate to be coated in regards to its surface roughness and porosity or absorbency, TO DETERMINE COVERAGE ON A FLAT SMOOTH SURFACE,DETERMINE THE LENGTH X WIDTH X THICKNESS IN INCHESTO OBTAIN THE CUBIC VOLUME INCH OF THE MIXED RESIN NEEDED. USE THE FOLLOWING EQUATION:1 GALLON OF RESIN CAN COVERS 1608 SQUARE FEETPER 1 MIL OR 0.001 INCH CURED COATING THICKNESS (LENGTH X WIDTH X COATING THICKNESS)/ 231 CUBIC INCHES PER GALLON = CUBIC-INCHES OF COATING NEED 50 INCHES X 36 INCHES X 0.010 (10 MILS) = 18 CUBIC INCHES18/231= .0779 GALLON OF MIXED RESIN USE THESE FACTORS TO CONVERT GALLON NEEDED INTO VOLUMETRIC OR WEIGHT MEASUREMENTS USE THE FOLLOWING FACTORS BY THE GALLON NEEDED:FOR EXAMPLE: 231 X .0779 = 17.99 CUBIC INCHESOR4195 GRAMS X .0779 = 326.79 GRAMS FLUID GALLON VOLUME CONVERSION1 GALLON = 231 CUBIC INCHES=1 GALLON = 128 OUNCES1 GALLON = 3.7854 LITERS1 GALLON = 4 QUARTS1 GALLON = 16 CUPSFLUID GALLON MASS CONVENTIONS1 GALLON OF MIXED UNFILLED EPOXY RESIN = 9.23 POUNDS1 GALLON OF MIXED UNFILLED EPOXY RESIN = 4195 GRAMS COLOR MATCHING AND COLOR BLENDING MAX COLOR PIGMENT PASTE CONCENTRATESThese are color concentrates only and must be dispersed an epoxy resin or PART A component. Used these colors to tint or pigment all of our MAX EPOXY RESIN SYSTEMS. Visit the page to view addition procedure.MAX COLOR KIT https://www.ebay.com/itm/311946633043These line of pigmented epoxy were optimized for most coating, casting, and other polymers applications.The use of an accurate scale is highly recommended for mix accuracy and color formula repeatability.Purchase this scale with any of our product offering and the shipping cost of the scale is free.https://www.ebay.com/itm/222630300203To achieve the desired tint hue and color saturation, it is best to make a small trial batch first and use a scale to accurately weigh the color concentrates as accurately as possible to achieve color reproduction when making a large batch. All color modification is done on the PART A or resin component only.****************************************************************PLEASE CHECK OUT OTHER AVAILABLERESIN SYSTEMS AT OUR eBay STOREFor our complete listing, please Visit our eBay store! DON'T FORGET OUR EPOXY MIXING KITClick The Link To Add To Order https://www.ebay.com/itm/222623932456EVERYTHING YOU NEED TO MEASURE, MIX, DISPENSE OR APPLY Proportioning the correct amount is equally as important to attain the intended cured properties of the resin system. The container in which the epoxy and curing agent is mixed is an important consideration when mixing an epoxy resin system.It must withstand the tenacity of the chemical and must be free of contamination.Most epoxy curing agent has a degree of corrosivity, as a general practice, protective gloves should be worn when handling chemicals of the same nature. MIXING KIT CONTENTS 1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams 4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix CupsOne Size Fits All Powder-Free Latex Gloves 2 Each Graduated SyringesWooden Stir SticksAssorted Size Foam Brush IMPORTANT NOTICEYour purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, PolymerProducts and Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use.There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period. PolymerProducts and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.
Price: 163.13 USD
Location: Ontario, California
End Time: 2023-09-24T00:18:08.000Z
Shipping Cost: 0.72 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Non-Domestic Product: No
Model: MAX GPE BLUE
Modified Item: No
Country/Region of Manufacture: United States
Custom Bundle: No
California Prop 65 Warning: Please Review Important Safe Handling Information In The Product Description Page Below. This product contains less than 0.1% (trace amounts) of a chemical known to the State of California to cause cancer. ●All components of this product are on the TSCA Inventory or are exempt from TSCA Inventory requirements under 40 CFR 720.30●
MPN: MAXGPEBLUE1.5
Brand: MAX EPOXY SYSTEM
