Dashcam Power Cable Parts Kit for Tesla Model S

Description: This kit of parts allows you to make a professional 12V always-on power tap for your dashcam that connects between the Tesla Model S intrusion module connector and the optional intrusion module. This is a kit of parts, and you have to do the assembly. The second image shows how it looks when assembled. Full instructions are available at our TeslaTap site, and we'll also include the link with your purchase. Parts are automotive grade, designed to withstand wide temperature ranges typically encountered in vehicles. The cable is designed for both two and three wire dashcams. Availability Not all Model S cars have the intrusion connector for always-on power. You should confirm you have the connector before purchasing the kit. Not suitable for the mid-2021 Model S or later that no longer has the connectors in the headliner. All Model S cars made after September 16, 2015 and before January 2021, will have the always-on power connector, and most cars from 2012 through late 2013 also include always-on power as do all European cars. Non-European cars made in 2014 and 2015 may not have the connector, or it may be tapped up with the large wire bundle in the headliner and hard to extract. The third photo shows how the taped connector on the microphone panel looks in a vehicle without the intrusion module. Parts in Kit3 silicone high-temp insulated wires, 7" each1 male housing and 3 male crimp pins1 female housing and 3 female terminals1 Dual T-Tap1 T21 tap for those with 3-wire dashcams (ignore for 2-wire dashcams)2 30 mm lengths of heat shrink tubingAssembled OptionWe also make a completed assembly option for a slightly higher price. See our assembled listing

Price: 15.95 USD

Location: Mountain View, California

End Time: 2023-09-19T16:59:35.000Z

Shipping Cost: N/A USD