Description: Wide Application This heater is specifically designed for Balboa VS, EL, TS, GS and BP Series control systems, which is a perfect replacement for Balboa part # 58117. Direct Replacement This heater can be a convenient substitution for a great deal of models, including 58104, 58120, 55033-01, 58106, 58117, 55033-02, 58056, 58109, 55035-01, 55035, 58064, C2400-0807-TPS, 58120, 58148, 26-0540-5S-KS, 58032, 58281, 58114, 55033, 55625, G7410, 53408. Please refer to description below for other compatible models. Reliable Performance The 58117 M-7 Heater Assembly is designed as a replacement heater for hot tubs and spas, equipped with its own sensor and installed in the front for easy maintenance by users.Solve the problem of circuit breaker tripping caused by corrosion of old heating elements, replace your old or broken heater High-Quality Material The heater is made of 316 stainless steel, which provides high corrosion resistance and durability, ensuring long-term use without rusting or damage. Great Compatibility --- This heater can also replace the following heater part numbers: 52756,55624,55625,55689,55813,56487,58000,58002,58010, 58016,58032,58083,58086,58089,58091,58103,58104,58105,58117, 58121,58123,58130,58148,58209,55464,55473,103017,106957,58064, 26-0807-5S-K, 26-0807-7S-K,26-807-5S-KS, 48-SP40-SB,48-SP55-FB,740-0617, 740-0655,9711-207, C2400-0807,C2400-0807-TPS,C2550-0807,C2550-0807-TPS, X300713,X300930, X300935,X300943,X333131,X801761 Product Diemension Series: M7, LE, VALUE, EL Manifold Length: 15" Manifold Diameter: 2" Kilowatt Rating: 4.0KW / 1.0KW Voltage Rating: 240V / 120V Number of Mounting Studs: 2 Tail Pieces Included: Yes (removable) Tail Piece Size: 2" x 2" (removable) Installation Notes Step 1: Disconnect the power supply of the equipment. Use an open end wrench to slowly crack the heater split nuts until the water in the pipe flows out Step 2: Locate the 2 sensors holder on the circuit board. Remove the 2 heater sensors by depressing the clip and gently pulling on the wire to remove each sensor cable Step 3: Use a 3/8” wrench to remove the 2 nuts holding the heater in place Step 4: Use a 3/8” wrench to remove the nuts on the copper straps. Then lift the copper straps Step 5: Use an open end wrench to loosen the heater split nuts and remove the old heater assembly and gaskets Step 6: Replace the new gaskets and install the new heater assembly, tighten the split nuts with an open end wrench. Step 7: Screw on the 2 nuts that holding the heater, insert the 2 heater sensors into the sensor bracket on the circuit board, make sure the copper strip is connected to the heater and tighten the nuts. Step 8: Put the cover on and screw on the 2 screws on the top of the enclosure. Turn on the water valve and pump, restore the power of the equipment, and test What You Get 1 heater, 1 pair of 2. 0" heater split nuts, 1 pair of 2. 0" heater tailpieces with o-ring gaskets
Price: 145.9 USD
Location: Rancho Cucamonga, California
End Time: 2024-02-08T15:27:07.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Brand: Ther-Motor
Type: Temperature Control Panel
Material: Steel
Number in Pack: 1
Color: Black
Features: Easy Assembly
Item Weight: 3.74lb
Manufacturer Warranty: 1 Year
Fitment: for Balboa VS, EL, TS, GS, and BP control systems
Voltage Rating: 240V / 110V-120V
Kilowatt Rating: 4.0KW / 1.0KW
Heater Diameter: 2"
Heater Length: 15"
