3 inch (76mm) ULTIMATE Lift Kit for 2003-2008 Honda Pilot by HRG Offroad

Description: This is the ultimate Honda Pilot lift kit. Designed to prevent axle or suspension binding issues, premature bushing wear, while providing stock ride quality. This no-compromises kit includes: set of 4 spacers (2 front and 2 rear), adjustable control arms for the rear, offset camber adjustment bolts for the front, full set of subframe spacers and extended bolts. This kit is designed to result in a level lift.*All parts are powder coated for a durable, attractive finish and use grade 10.9 hardware.Actual spacer height is 2.5 inches Front and 1.5 inches Rear, 3 inch lift is based on before and after measurements taken at the fenders. *Results may vary depending on the condition of existing suspension. Fits 2003-2008 Pilot What’s in the box? 2 2.5 inch front spacers2 1.0 inch (for level lift) 2 replacement front sway bar links that are specifically made to work with the lift 2 front brake line relocation brackets2 rear brake line relocation brackets24 subframe spacers 1 foam sealall necessary hardwaredetailed installation instructionsqr code link to installation video Tire Sizes2003-2008 Honda PilotLift Required? Stock 235/70/16 (28.9") N/A225/75/16 (29.2") 0245/70/16 (29.5") 0235/75/16 (29.8") 1.5”255/70/16 (30.0") 2”245/75/16 (30.5) 3”265/70/16 (30.6")3” FAQ Q: "Why are the front spacers taller than the rear spacers?"A: The suspension geometry is different in front than in rear. In order to get an equal amount of lift front and back, different size spacers have to be used. Q: "Will I need an alignment after installing this kit?"A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1". Q: "What are the extra bolts for?"A: The 2 cam bolts included in this kit are used to adjust the camber on the front suspension, which is necessary after installing a lift kit. Q: "Will lifting my car affect the axles?"A: Sometimes. It depends on the amount of lift and the type of axles you have in your vehicle. Parts store rebuilt axles are more prone to having issues. In general, installing lift spacers greater than 1.75" will require a subframe drop or "body lift" to maintain proper axle angle. Q: "Do I need to replace my suspension bushings when installing a lift kit?"A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely without binding up. Q: "Will lifting my car negatively affect the handling?"A: In most cases, yes. By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Our lift kits are intended for off-road use where suspension travel and ground clearance are more important. Accessories HRG Offroad Rock lights 6 pc kit RGB Rock Lights Single Colors and RGB color to choose from. Original Osram/Cree A Grade Chips Waterproof: IP68 & IP69KDuPont painting, Aluminum housing 5X120 25MM HUBCENTRIC WHEEL SPACERS FOR HONDA (PAIR) 25mm spacer allows fitment of wider tires on stock wheels! Hubcentric spacers are machined to fit 72.56mm Honda center bore.Sold in pairs Professional Installation recommendedFOR OFF-ROAD USE ONLY!MADE IN U.S.A.

Price: 699 USD

Location: Mooresville, North Carolina

End Time: 2024-08-07T19:45:35.000Z

Shipping Cost: 0 USD