2 inch (51mm) Lift Kit for 1990-1997 Honda Accord HRG Offroad

Description: Want to lift your 1990-1997 Honda Accord? Here is the solution for you! Our kit bolts to the top of your strut, giving you a net lift of approximately 2 inches (51mm). Complete kit includes: set of 4 1.5 inch spacers (see FAQs), hardware and detailed illustrated installation instructions. These spacers do not require the disassembly of the strut. Please see our other listings for more lift kits and parts. Fits1990-1997 AccordFeaturesset of 4 spacers (2 front & 2 rear)Hardwaredetailed illustrated installation instructionsFAQQ: Why do you say it is a 2 inch lift if the spacers are only 1.5 inches tall?A: The strut does not bolt to the wheel (1:1) it bolts to a lower arm which magnifies the lift amount (1.5:1) (see item photos) Q: How is the amount of lift measured?A: The amount of actual lift is measured from the fender lip to the ground. Q: "What size tires can I run on my Accord after installing this lift kit?"A: With minimal cutting or trimming, you can install a 205/75/15 tire. A 215/75/15 tire will require more trimming of the fender opening for clearance. You may also need to go to a lower offset wheel for added clearance. Q: "Will I need an alignment after installing this kit?"A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1". Q: "Will lifting my car affect the axles?"A: Sometimes. It depends on the amount of lift and the type of axles you have in your vehicle. Parts store rebuilt axles are more prone to having issues. In general, installing lift spacers GREATER than 1.5" on the front of your Honda will require a subframe drop or "body lift" to maintain proper axle angle. Q: "Do I need to replace my suspension bushings when installing a lift kit?"A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely. Q: "Will lifting my car negatively affect the handling?"A: In most cases, yes. By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Our lift kits are intended for off-road use where suspension travel and ground clearance are more important. Our powder coated steel strut spacers are designed to work with your factory Honda suspension. Sold as a set of 4 spacers, for front or rear sets please see our other listings. These spacers do not require the disassembly of the strut. Accessories HRG Offroad Rock lights 6 pc kit RGB Rock Lights Single Colors and RGB color to choose from. Original Osram/Cree A Grade Chips Waterproof: IP68 & IP69KDuPont painting, Aluminum housing 20 INCH SINGLE ROW LED LIGHT BAR 8,560 LUMENS Need a LOT of light for off-road driving but don't want a huge light bar hanging off your car? This slim 20 inch single-row light bar utilizes a combination beam pattern and pumps out an incredible 8,560 lumens! Focused beam can provide light for almost 3600 feet!Lifetime WarrantyOur kits are powder coated for a durable, attractive finish and use grade 10.9 hardware. all vehicles are different and lift height can vary due to the condition of the suspension before installing the kit. These numbers are averages from real world measurements before and after the kit, and should only be used as general guidelines Professional installation recommended.FOR OFF-ROAD USE ONLY!MADE IN U.S.A.

Price: 189 USD

Location: Mooresville, North Carolina

End Time: 2024-08-11T03:50:41.000Z

Shipping Cost: 0 USD