Description: Original Xbox Motherboard Upgraded to 128 RAM v1.0 motherboard upgraded to 128 RAM (stock is 64) capacitors near CPU replaced with good solid caps from Mouser board thoroughly cleaned in 99% IPA thermal paste replaced with Arctic MX-2Heat sink added to MCPX southbridge (these can get quite hot and the factory did not provide any heat sink)pin header added to lpc portclock capacitor removed: (these are known to leak and all they do is save the time/date for a few hours if system is unplugged)(time/date will auto set if you have the xbox connected to internet - so that further makes the clock cap moot) comes with:Motherboardcontroller port daughterboard NOTES: if you are installing this into a v1.6 case, please do not crank down the 2 screws near the AVIP portthe v1.6 case has shorter standoffs and this location and it will flex that board if you over-tighten themjust barely snug these 2 screws down please leave the metal cage in your lower casing in place. this provides several ground points to the mother board and power supply.it also helps direct airflow where is need to be and acts as a safely barrierto stop small objects from falling through vent slots into mains power any hard drive you use must be unlocked and have a proper dash installed note for international bidders:this power supply runs on 100-127 volt North America/Japan powerif your country has 200-240 volt mains you will need a step down power adapteror a correct voltage power supply
Price: 159 USD
Location: Keene, New Hampshire
End Time: 2024-12-03T19:14:19.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
